Development and Applic Genetic L-system progr SimPack Getting Starte Functional programm SmartBee Multichannel
|Published (Last):||21 April 2007|
|PDF File Size:||17.75 Mb|
|ePub File Size:||1.25 Mb|
|Price:||Free* [*Free Regsitration Required]|
Development and Applic Genetic L-system progr SimPack Getting Starte Functional programm SmartBee Multichannel Programming with Equat Logic Programming with Functional Programming Logic Programming and This application note explains how to program Atmel T89C51xx and AT89C51xx microcontrollers with device programmers that use this type of single buffer. To program an Atmel A T89C51xx with a device programmer, a full chip erase operation must be achieved to remove all security levels.
User memory area 64 KB size where the upper 1 KB is used for bootloader program. A hardware security byte for configuration information and security levels. ROM bootloader memory 2 KB size?
Hardware security byte for configuration information and security levels. As bootloader is in ROM memory, no erase or write action is possible on this area. Figure 2. Figure 3. User memory area 64 KB size Bootloader memory 4 KB size Hardware security byte for configuration information and security levels. They are dedicated to a A T89C51xx, however they can differ for the same product depending on the communication interface for ISP.
The last updated release of bootloader program for each device is available on Atmel website : www. Some have moved to separate buffers to adapt to these new A T89C51xx. The usage of a single buffer to program or to read an Atmel A T89C51xx has major drawbacks:? Since user memory and bootloader memory share the same address space, the bootloader program must be placed at a different address than the regular bootloader address.
A copy of the bootloader from the regular start address has to be placed in the proper bootloader start address in the buffer. When read, all areas are read. When program, all areas are programmed even if the user does not want to modify the bootloader program.
When erase, all areas are erased, Bootloader must be reprogrammed for ISP purposes. Users have to download the bootloader program from Atmel website. Even using a single buffer, some device programmers ask for the dedicated memory area which the user wants to access. In any case, whatever the buffer type and access to these memory areas, users have to be careful when using a device programmer to program Atmel A T89C51xx. First download from the Atmel website www.
On the device programmer, select the microcontroller to program. This file will be placed in the buffer area at the start address of bootloader program e. Move this buffer area from the start address to the regular address given by the programmer device.
Load the user program ensuring that the previous buffer is not cleared by a default value such as FFh or 00h. Select the program operation. Remember to program XAF configuration bytes according to the configuration setup. This can be done either automatically or separately.
Program HSB: Hardware configuration information and product security levels. This will prevent a the same non-correct programming place or non-desired memory erased. Prepare the programming buffer properly before program operations. Sequence: 1. Load the bootloader program, check that the program starts at Fh. Load the user program and be careful not to prefill buffer with a specific value. No license, express or implied, by estoppel or otherwise, to any intellectual property right is granted by this document or in connection with the sale of Atmel products.
Atmel makes no representations or warranties with respect to the accuracy or completeness of the contents of this document and reserves the right to make changes to specifications and product descriptions at any time without notice. Atmel does not make any commitment to update the information contained herein. Atmel Corporation All rights reserved. Other terms and product names may be trademarks of others.
Printed on recycled paper.